MACSEAL DF (Direct Fire) - Crack and Joint Sealant

MACSEAL DF (Direct Fire) is a single component joint and crack sealant specifically designed for use with Direct Fired, single walled melters. MACSEAL DF is manufactured using select engineered asphalt cements, polymers, select oil resins and UV inhibitors. MACSEAL DF will not flow from the joint or be picked up by vehicle tires, foot traffic, skateboards or roller blade wheels in high surface temperatures.
Recommended Use
MACSEAL DF was designed for the routine maintenance of asphalt concrete pavements or Portland Cement Concrete on driveways, parking lots, bicycle paths and walkways.
Beram DF weighs approximately 9.5 lbs./gal (1.14 kg/L). A joint ½ X ½ (12.7 mm X 12.7 mm) requires approximately 12 lbs. Per 100 lineal feet or 17.7 kgs per 100 lineal meters
• 2 x 25 lb. polybags in a high-strength corrugated cardboard container
• 1 X 30 lb. polybags in a high-strength corrugated cardboard container.
Copyright © 1995-2021 by Cantat Associates Inc. All Rights Reserved.